Hyundai 4-Leg Truck Oil Filter Change: A Detailed Guide

Hyundai 4-Leg Truck Oil Filter Change: A Detailed Guide

Hyundai 4-leg trucks are popular for their power and durability. Regular maintenance, especially changing the oil filter, plays a crucial role in maintaining performance and extending engine life. This article provides a detailed guide on how to change the oil filter on a Hyundai 4-leg truck.

The oil filter functions to remove impurities and dirt from the engine oil, ensuring the oil remains clean and effectively lubricates the engine. Regular oil filter changes on Hyundai 4-leg trucks help prevent wear, overheating, and engine damage.

Hyundai 4-Leg Truck Oil Filter Change Procedure

Changing the oil filter on a Hyundai 4-leg truck must be done according to the correct procedure to ensure effectiveness and safety:

1. Preparation

  • New Oil Filter: Choose a genuine oil filter or one that is compatible with your Hyundai 4-leg truck model. Usually, the oil filter for Hyundai HD99 trucks has the code 23303.
  • New Engine Oil: Use the type of engine oil recommended by the manufacturer.
  • Tools: Prepare the necessary tools such as a wrench, oil drain pan, rags, gloves, etc.

Hyundai HD99 oil filterHyundai HD99 oil filter

2. Draining Old Engine Oil

  • Start the engine to warm up the oil for easier draining.
  • Turn off the engine and place the oil drain pan under the oil drain plug.
  • Open the oil drain plug and let the oil drain completely.
  • Tighten the oil drain plug after the oil has completely drained.

3. Changing the Oil Filter

  • Remove the old oil filter using a specialized wrench. Be careful to keep the oil filter upright to avoid oil spillage. For the Hyundai HD99 truck, the reference oil filter size is: thread M26 x 1.5P, height 150mm, diameter 102mm.
  • Apply a layer of new engine oil to the rubber gasket of the new oil filter to ensure a tight seal.
  • Tighten the new oil filter by hand until it is snug.
  • Use a wrench to tighten an additional 1/2 to 3/4 turn.

4. Adding New Engine Oil

  • Pour new engine oil into the engine according to the specified capacity.
  • Check the oil level with the dipstick.
  • Start the engine for a few minutes to allow the oil to circulate.
  • Turn off the engine and check the oil level again, adding more if necessary.

Notes When Changing the Oil Filter

  • Keep the oil filter upright when removing and installing to avoid spilling oil.
  • Apply new engine oil to the rubber gasket of the new oil filter.
  • Do not overtighten the oil filter.
  • Check the oil level carefully after changing.
  • Dispose of used engine oil properly. Used engine oil from Hyundai 4-leg trucks needs to be collected and disposed of at professional collection points.

Conclusion

Changing the oil filter on a Hyundai 4-leg truck is an important maintenance task. Following the correct procedure and paying attention to the above points will help protect the engine, extend the life of the vehicle, and ensure optimal performance. Contact us – Xe Tải Mỹ Đình – for advice and support on Hyundai truck maintenance and repair services.

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published. Required fields are marked *